B2 Pine Relaxer Lumbar Support Cushion

The Back2 Pine Relaxer is the latest in adjustable lumbar cushion techonology.

Unlike most adjustable lumbar cushions that use an air filled cushion to increase or decrease support in the lumbar region, the Back2 Pine Relaxer uses a mechanical system that doesn't rely on air. By twisting the lumbar adjuster the lumbar section will increase or decrease according to your desired support.

Designed to be comfortable and portable, the Back2 Pine Relaxer can be used with or without the seat. To use just the back support simply remove the seat cushion that is attached to the back support by a velcro strip. The complete Back2 Pine Relaxer Lumbar Seat Cushion weighs approximately 2.4kg.

To use the Back2 Pine Relaxer Lumbar Seat Cushion:

1. Remove the seat cushion if you wish to use only the Lumbar Cushion.
2. Place the Pine Relaxer Lumbar Cushion on any chair and adjust the postion so that it is at the height of your lumbar region.
3. Once adjusted, lock the snap buckle around the back of the chair and tighten the strap.
4. Turn the Lumbar Adjuster clockwise or counterclockwise until you reach your desired level of support.